Overview
Switches from the Catalyst 9200 Series have security measures that safeguard the integrity of the switch’s hardware, software, and any data that passes through it. It offers resilience that keeps your company operating smoothly. Catalyst 9200 Series switches give you everything you need now with investment protection for future developments when you combine that with open APIs of Cisco IOS XE and programmability of the UADP ASIC technology. Catalyst 9200 Series switches are the industry’s unmatched solution with differentiated resiliency and progressive architecture for cost-effective branch-office access thanks to their full PoE+ capability, power and fan redundancy, stacking bandwidth up to 160 Gbps, modular uplinks, Layer 3 feature support, and cold patching.
Specifications
General
Device Type: Switch – 48 ports – L3 – managed – stackable
Enclosure: Type Rack-mountable
Subtype: Gigabit Ethernet
Ports: 48 x 10/100/1000
Performance Stacking bandwidth: 160 Gbps | Switching bandwidth: 176 Gbps | Forwarding rate: 261.9 Mpps
Capacity Virtual networks: 4 | IPv4 routing table entries: 4000 | IPv6 routing table entries: 2000 | Flexible NetFlow entries: 16000 | Packet buffer size: 6 MB | VLAN IDs: 4096 | Switched virtual interfaces (SVIs): 1000
MAC Address Table Size: 32000 entries
Jumbo Frame Support 9198 bytes
Routing Protocol: OSPF, RIP, IS-IS, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng, MSTP
Remote Management Protocol: SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF
Encryption Algorithm 128-bit AES
Features ARP support, Spanning Tree Protocol (STP) support, Quality of Service (QoS), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), PXE support, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Management Information Base (MIB), Class of Service (CoS), Flexible NetFlow (FNF), Cisco StackWise-160 technology, DiffServ Code Point (DSCP) support, MACsec support, Control plane protection (CoPP), Switched Port Analyzer (SPAN), Embedded Event Manager (EEM), Protocol Independent Multicast (PIM), First Hop Security (FHS), PVLAN support, Committed Information Rate (CIR)
Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP)
RAM: 4 GB
Flash Memory:4 GB
Expansion / Connectivity
Interfaces: 48 x 10/100/1000 Base-T RJ-45 | 1 x network stack device | 1 x management (LAN) RJ-45 | 1 x console RJ-45
Expansion Slots: 1 (total) / 1 (free) x expansion slot
Power
Power Device: Internal power supply – hot-plug
Installed: Qty 2 (max)
Power Redundancy: Optional
Power Provided: 125 Watt
Voltage Required: AC 100-240 V (50 – 60 Hz)
Miscellaneous
MTBF: 571,440 hours
Compliant Standards: CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN 61000-6-1, AS/NZS 60950-1, CCC, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, CNS 13438, EN 55022 Class A, FCC CFR47 Part 15 B Class A, EN 300 386, KN32, KN35, EN 55032 Class A, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, TCVN 7189 Class A, V-3 Class A, TCVN 7317, CISPR 35
Dimensions & Weight
Width: 17.5 in
Depth: 13.8 in
Height: 1.7 in
Weight: 11.02 lbs
Environmental Parameters
Humidity Range Operating: 5 – 90% (non-condensing)
Min Storage Temperature: -40 °F
Max Storage Temperature: 158 °F
Humidity Range Storage: 5 – 90% (non-condensing)
