AIR-AP2802E-E-K9 Specification
Software
Cisco Unified Wireless Network Software Release 8.2.111.0 or later
Cisco IOS®XE Software Release 16.3
Supported wireless LAN controllers
Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller
Cisco Catalyst 3850 Series Switches, Cisco Catalyst 3650 Series Switches
Cisco Mobility Express
802.11n version 2.0 (and related) capabilities
4×4 MIMO with three spatial streams
Maximal ratio combining (MRC)
802.11n and 802.11a/g beamforming
20- and 40-MHz channels
PHY data rates up to 450 Mbps (40 MHz with 5 GHz)
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
802.11 dynamic frequency selection (DFS)
Cyclic shift diversity (CSD) support
802.11ac Wave 1 capabilities
4×4 MIMO with three spatial streams
MRC
802.11ac beamforming
20-, 40-, and 80-MHz channels
PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz)
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
802.11 DFS
CSD support
802.11ac Wave 2 capabilities
4×4 MU-MIMO with three spatial streams
MRC
802.11ac beamforming
20-, 40-, 80, 160-MHz channels
PHY data rates up to 5.2 Gbps
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
802.11 DFS
CSD support
Integrated antenna
Flexible radio (either 2.4 GHz or 5 GHz)
2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth
5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90°
Dedicated 5-GHz radio
5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth
External antenna (sold separately)
2802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz)
Cisco offers the industry’s broadest selection ofantennas, delivering optimal coverage for a variety of deployment scenarios
Smart antenna connector
Available on the 2802e Series access points only
Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point
Required when running the flexible radio as either a second 5-GHz serving radio or Wireless Security Monitoring radio
Interfaces
2802I/E
2×100/1000BASE-T autosensing (RJ-45)
Management console port (RJ-45)
USB 2.0 (enabled via future software)
Indicators
Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)
Access point (without mounting brackets): 2802I: 8.66” x 8.68” x 2.17”, 2802E: 8.66” x 8.77” x 2.50”
Weight
Cisco Aironet 2802i
3.53 lb (1.6 kg)
Cisco Aironet 2802e
4.6 lb (2.09 kg)
Input power requirements
802.3at PoE+, Cisco Universal PoE (Cisco UPOE®)
802.3at power injector (AIR-PWRINJ6=)
Power draw
26W at the PSE with all features enabled except for the USB 2.0 port
30W at the PSE with the USB 2.0 port enabled
Environmental
Cisco Aironet 2802i
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
Operating temperature: 32° to 104°F (0° to 40°C)
Operating humidity: 10% to 90% (noncondensing)
Operating altitude test: 40˚C, 9843 ft.
Cisco Aironet 2802e
Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
Nonoperating (storage) altitude test: 25˚C, 15,000 ft.
Operating temperature: -4° to 122°F (-20° to 50°C)
Operating humidity: 10% to 90% (noncondensing)
Operating altitude test: 40˚C, 9843 ft.
System memory
1024 MB DRAM
256 MB flash
